Vintage Lace Pendants by Laura Beth Love
all arwork & images copyright Laura Beth Love 2009
Thank goodness springtime is right around the corner! The change of seasons always seems to offer just the right gentle push I need to leave behind the old and begin some new projects. I look forward to the refreshing & soft palette of spring — and to the longer days it affords! I created these pendants with pieces of antique lace & glass. Enjoy!
Laura
How to Make Domino Jewelry
Level: Beginner/Easy
Vintage wood dominoes (click to learn about the history of dominoes )
Jewelry made from recycled materials is earth-friendly and all the rage. The exciting part about making jewelry from recycled materials is that the supplies you need are most likely already right in your own home!
One type of jewelry that is super-stylish and easy to make is domino jewelry. Dominos are fun to craft with and they can easily be made into either pins or pendants.
I created this domino pendant from a copy of a vintage St. Patrick's day post card
To make domino jewelry you will need dominos (either the old fashioned wooden kind or the newer, plastic kind), miscellaneous papers (think collage elements such as copies of vintage images, ephemera, scraps of pretty paper and words or text cut from an old book or magazine, wallpaper scraps, old cigar box labels, etc.), scissors, a decoupage medium, a sponge brush or small paintbrush to apply decoupage medium, jump-rings (for pendants) or pin-backs (for pin brooches), and a strong adhesive glue.
Optional additional embellishing materials include colored pencils, pens, markers, glitter, sequins, small beads, flat buttons, and bits of lace.
I usually like to decorate only one side of the domino and leave the numbered side (the side with the dots) untouched or mostly uncovered. That way when you are wearing your pendant you can turn it over and show your friends that it's a domino!
For this domino pendant I used an illustration and text from a damaged antique book
To begin, first choose your base paper. That will be the largest piece of paper that will cover only the front, or plain side of the domino. This will be the foundation for your finished design. To create your paper base, lay your domino on top of the paper and trace around the domino with a pencil. Then remove the domino and cut out your base paper.
Using a small paintbrush or sponge brush, apply a thin coat of decoupage medium to the plain side of the domino following the directions on the decoupage medium. Next adhere your base paper to the domino and gently press to adhere, being careful to remove all bubbles and lumps — and set aside until completely dry.
Mod Podge is one type of Decoupage Medium
Now comes the fun part! Select images or snippets from your papers and arrange them in a collage-like manner to your domino's base paper. Use a very thin coat of the decoupage medium to adhere your elements to your domino. Let your creativity be your guide.
Here's a tip: I like to start with the larger pieces of paper and then add smaller snippets to that piece in a layered fashion.
When finished, set aside until completely dry. Once your artwork is complete, apply another coat of decoupage medium to seal the piece and let it dry completely. To make a domino pin brooch, adhere a pin-back to the reverse side of your domino with a strong adhesive. To make a domino pendant, adhere a jump ring to the top edge of your domino with a strong adhesive.
Another pendant made with an illustration from a damaged antique book.
With a few basic materials and a little creativity, you can create your own recycled material jewelry that is fun to make and fun to wear!
P.S. — Oh, and be sure to learn how to play dominoes before you make domino jewelry, as you can be sure people at least one person who sees your awesome domino jewelry will ask you, "How do you play dominoes, anyway?" (click here to learn!) Laura
( Click here to see more of my domino jewelry! )
Advanced Technique: Resin Coated Domino Jewelry
Level: Advanced To achieve a glossy, glass-like finish you can coat your domino with resin. Working with resin is an advanced technique that requires a bit more time, patience, as well as safety precautions.
I used a copy of an antique Valentine to make this domino pendant, and then coated it with resin
What is resin jewelry?
The Dick Blick Art Materials website describes it best: " Resin jewelry is made from liquid plastic that turns solid when a hardener is added....Resin has a wonderful appeal for its glass-like properties from crystal clear to translucent glowing hues."
Click here to learn more about the properties of resin.
Before you begin: Resin can be hazardous. It is extremely important to carefully read and follow all directions that are included with the product you are working with. It is also recommended that you do not work with resin around children or pets. You should also read all MSDS (safety data sheets) for any hazardous mediums that you are going to work with. I recommend purchasing materials from businesses that include the MSDS safety data sheets with your purchase.
Before coating a domino with resin, complete all the steps above under the How To Make Domino Jewelry, stopping after applying the finishing/sealing coat of decoupage medium. (do not adhere pin-back or jump rings to your domino.) Allow finished domino to dry overnight.
Working in a clean, dust-free, and temperature controlled area (according to resin packaging directions), prepare the resin exactly according to package directions. Be sure to cover your workspace with newspaper to protect all surfaces, and have paper towels on hand in case of any spills or messes.
Allow resin to set and dry according to package directions. Once completely set and dry, follow the directions above to adhere your pin-back or jumpring to your finished domino.
Image was embellished with glitter before resin was applied
Check out my new jewelry book!
In my last blog post I discussed my basic design process for working with a unique focal element, in this case, some fantastic vintage & antique keys that I came across at a flea market last summer. I also discussed the basics of choosing complimentary materials such as beads, and the 'laying out,' or organization of the design. The following post will discuss the fabrication of those keys into a piece of unique, one of a kind piece of jewelry.
Below are two styles of necklaces made with keys:
Vertically Hung Key With Beaded Chain
Horizontally Hung Key Necklace
Materials List for both projects
Vintage Keys
WD-40 and paper towels to clean up your keys and remove rust
Coordinating wire: Brass or copper work well. For the necklaces shown, I used Beadalon ColourCraft Permanently Colored Copper Wire in Brown (20 gauge) and Zebra Wire Colored Copper Wire in Brown in 18, 22 and 26 gauge
Antique finish brass or copper chain (for horizontally hung necklace)
Antique finish brass or copper jump rings (for horizontally hung necklace)
Antique finish brass or copper clasps (toggle and or lobster-claw style)
A variety of gemstone and glass beads
Round nose pliers
Flush-cut pliers
Chain nose pliers
*Aside from the keys, most items listed above are available through Fire Mountain Gems Jewelry Supply http://www.firemountaingems.com/
FABRICATION
If you find that your keys are a little rusty, spray them with WD-40 and clean well with paper towels. Because the keys I used were a nice, rusty brown, I decided to use brown colored copper wire for my necklaces. I liked the keys hung both vertically and horizontally so I decided to make both styles. Below are the instructions for both.
beaded chain technique with toggle clasp
*For these necklace you will need to know how to make a basic wrapped loop. This is a simple technique that is basic to jewelry making. If you do not know how to make a wrapped loop, directions can be found here: http://www.firemountaingems.com/beading_howtos/beading_projects.asp?docid=652t
Step 1. Cut a 2.5' piece of wire and connect one end to the hole in the top of the key with a basic wrapped loop. (For this style I used the 20 gauge wire)
Detail of wrapped wire loops attached to key
Step 2. Place a bead onto the other end of the wire and complete the end with another closed, wrapped loop.
Step 3. Repeat your next section with another section of 2.5' wire, this time connecting one end of the wire to the previously finished beaded loop. Again, place a bead on the wire, and complete the unfinished wire end with another wrapped loop.
Step 4. Continue repeating this 'wire, bead, loop' process until you have created one entire side of beaded chain in the length that you desire. (I made each side of my necklace approx. 10', for a total finished necklace length of 21' including key and clasp.)
Step 5. Repeat steps one through four to create the other side of your beaded chain.
Step 6. Attaching the toggle clasp: When you have finished your beaded chain in the length that you desire, attach your clasp. Using the same wrapped loop technique, attach the 'bar' part of the toggle clasp to one side of your beaded chain and the 'loop' part of the toggle clasp to the other side of your beaded chain. That's it! You are finished!
Detail of toggle clasp attached with wire wrapped loops
Step 1. Place key horizontally on table. Cut a 3' piece of wire and connect one end to the hole in the top of the key with a basic wrapped loop. (For this style I used the 20 gauge wire).
Step 2. P lace a bead onto the other end of the wire and complete the end with another closed, wrapped loop.
Step 3. Cut another 3' piece of wire and with a wrapped loop, connect one end to other, opposite end of the key, wrapping the wire around the body of the key to the inside of the key's teeth.
Step 4. Place a bead onto the other end of the wire and complete the end with another closed, wrapped loop.
Step 5. Continue this technique using 2.5' lengths of wire and beads, until you have the beaded look you want; I used two beads on one end of the key and four on the other end of the key. *Do NOT wrap the open end of the wire after your last bead.
Step 6. Cut two lengths of chain (I used two 10' lengths of chain) and now making a loop in the wire after your last bead, thread the chain onto the loop and wrap the end. Repeat with other side. Your lengths of chain are now attached to each side of your necklace.
Step 7. Attaching the clasp: At the end of each length of your chain you will attach your clasp. For this style necklace I used a lobster claw style clasp. Use a jump ring to attach the clasp to one side of your chain and complete the other side of your chain with another jump ring. You are finished!
Lobster-claw style clasp
A different color combination: Citrine and Honey Jade
Pink Rhodonite gemstone beads
If you have any questions, feel free to post them below! — Laura
My dining room. Well, like everything else around here, it seems like it's taking forever to pull together. I am oh-so-close to doing a full reveal for you (like next-week-close!), but I wanted to give you the juicy details about the fabulous lighting that we installed that totally completes the look I was going for. Love it when that happens! The last time you saw this space, it looked like this:
Awesome planked wall, beautiful white-washed table and the doesn't-quite-fit-in spray painted chandy. I'm happy to report that it has come a long way since then. When this picture was taken, I was feeling so stumped as to how I could make this room feel like I wanted it to, and I knew that what was holding me back was that coral chandelier. I mean, don't get me wrong- I love the color, but it was definitely limiting me. And limits I do not like. That's when Brad, from Lucent Lampworks, stepped in and said he might be able to help me.
His lighting. Oh, his lighting. It's gorgeous and simple and modern and vintage and industrial and cool all at once. Brad invited us over to his shop to take a look at his work and we were blown away. He's not a lighting guy by trade, but creates some beautiful fixtures in his spare time. Just recently one of his lights was featured on Extreme Home Makeover, so you know if Ty P. is sold, then this guy is the real deal. Anyway, I digress. I told him what I wanted, and you know what? He made it for me. Custom. And they're awesome. And his prices are ridiculously reasonable. See? I like Lucent Lampworks so much I can't even write in complete sentences. Let's just cut to the chase, shall we?
I really wanted two sconces to flank the piece of Marbled Paper Art that fit in with the whole coastal, cottage feel. Brad searched for these cages and found them on Ebay and turned them into fabulous sconces. I absolutely love them- all they need are some edison bulbs, but I keep forgetting to pick them up when I'm out!
I love the contrast between the industrial sconces and the marbled paper art.
I'm still messing around with the final touches for the dining room (for instance, those plant pots aren't staying that color, but it's been too darn cold to spraypaint!), so most likely this buffet will look different next time you see it.
As for the pendant light for above my dining room table, I decided to go with a white enamel shade (similar to this one in his shop) that Brad reclaimed from the Scranton Lace Factory. This light is probably from the early 1900's, which I love! It has loads of character and chippy goodness.
It's perfect, isn't it? And, I am thrilled with the view from the kitchen, now that it includes my fabulous lights!
The pendant has really soft uplighting from holes in the top of the shade that is just beautiful and helps illuminate the space better at night.
I seriously could not be happier with my new lights! If you guys are in need of any lighting, head over to Lucent Lampworks to see all that Brad has to offer! You will not find a nicer, more accomodating guy than Brad and he is super talented. Use the code EC2tenoff to receive 10% off your order and tell him we sent you!
Tell me, what does your dream light look like??
